即时比分007

    <noframes id="bp55v">
    <strike id="bp55v"><p id="bp55v"></p></strike>

      <noframes id="bp55v"><form id="bp55v"></form>

      <noframes id="bp55v"><form id="bp55v"><nobr id="bp55v"></nobr></form>

      <form id="bp55v"><nobr id="bp55v"><progress id="bp55v"></progress></nobr></form>

          <form id="bp55v"><th id="bp55v"><progress id="bp55v"></progress></th></form>

                  Moldmaking & Casting Materials
                  Ph. 561-588-1001



                  Moldmaking
                  Rubbers and
                  Materials
                  Moldmaking Rubbers
                  Casting Resin
                  Shelf Life Extender
                  Mold Releases
                  Urethane Rubbers
                  Silicone Rubbers
                  Polyurethane Casting Resin
                  Poly-Purge Gas Blanket Spray
                  Waxes
                  PVA
                  Aerosols

                  View our MOLD RELEASES.......................>>

                  Polyurethane RTV Mold Rubber
                  The 74-30 is the softest of our RTV rubbers. These rubbers can be used for making
                  durable, easy releasing molds for casting gypsum plasters, waxes, cement, epoxy resins
                  polyester resins along with urethane and acrylic. Proper
                  mold release is needed to
                  insure easy parting from the mold.

                  74-30 RTV Liquid Urethane
                  Mold Rubber
                  Mixed 1 Part A to 1 Part B
                  Working Time: 30 Minutes
                  Demold Time: 24 Hours
                  Hardeness, Shore A: 30

                  Info: Our softest polyurethane. Fairly soft and stretchable. Good for molds with complex shapes or detail that might require an easily flexible rubber.

                  Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

                  74-30 Is Available in 2 Part Kits
                  Cat No.
                  Description
                  Price
                  POLY-74301
                  16oz Kit (8oz A + 8oz B)
                  $15.00
                  POLY-74302
                  32oz Kit (2 LBs)
                  $25.00
                  POLY-74303
                  2 Quart Kit (4 LBs)
                  $42.00
                  POLY-74304
                  1 Gallon Kit (8 LBs)
                  $70.00
                  POLY-74305
                  2 Gallon Kit (16 LBs)
                  $114.00
                  POLY-74306
                  10 Gallon Kit (80 LBs)
                  $430.00

                  Kit sizes above show total volume included in kit
                  with total weight in parentheses.


                  Product Data Sheets
                  74-30 Product Bulletin

                  74-30 Part A-- MSDS
                  74-30 Part B-- MSDS

                  75-60 RTV Liquid Urethane
                  Mold Rubber

                  Mixed 1 Part A to 1 Part B
                  Working Time: 15 Minutes
                  Demold Time: 12 Hours
                  Hardness, Shore A: 60

                  Info: A medium hardness polyurethane. Similar in hardness to a pencil eraser. The cured rubber will flex but has very little stretchability.

                  Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

                  75-60 Is Available in 2 Part Kits
                  Cat No.
                  Description
                  Price
                  POLY-75601
                  16oz Kit (8oz A + 8oz B)
                  $15.00
                  POLY-75602
                  32oz Kit (2 LBs)
                  $25.00
                  POLY-75603
                  2 Quart Kit (4 LBs)
                  $42.00
                  POLY-75604
                  1 Gallon Kit (8 LBs)
                  $70.00
                  POLY-75605
                  2 Gallon Kit (16 LBs)
                  $114.00
                  POLY-75606
                  10 Gallon Kit (80 LBs)
                  $430.00

                  Kit sizes above show total volume included in kit
                  with total weight in parentheses.

                  Product Data Sheets
                  75-60 Product Bulletin

                  75-60 PART A -- MSDS
                  75-60 PART B-- MSDS

                  75-80 RTV Liquid Urethane Mold Rubber
                  Mixed 2 Parts A to 1 Part B
                  Working Time: 45 Minutes
                  Demold Time: 24 Hours
                  Hardness, Shore A: 80

                  Info: A very hard polyurethane rubber. Very close in hardness to a car tire. Best for flat molds with minimal detail. Also can be used for certain concrete stamping applications.

                  Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

                  75-80 Is Available in 2 Part Kits
                  Cat No.
                  Description
                  Price
                  POLY-75801
                  24oz Kit (16oz A + 8oz B)
                  $21.75
                  POLY-75802
                  48oz Kit (3 LBs)
                  $37.25
                  POLY-75803
                  3/4 Gallon Kit (6 LBs)
                  $60.50
                  POLY-75804
                  1 1/2 Gallon Kit (12 LBs)
                  $97.50
                  POLY-75805
                  3 Gallon Kit (24 LBs)
                  $166.50
                  POLY-75806
                  15 Gallon Kit (120 LBs)
                  $620.00

                  Kit sizes above show total volume included in kit
                  with total weight in parentheses.

                  Product Data Sheets
                  75-80 Product Bulletin

                  75-80 PART A -- MSDS
                  75-80 PART B-- MSDS

                  75-90 RTV Liquid Urethane Mold Rubber
                  Mixed 2 Parts A to 1 Part B
                  Working Time: 10 to 15 Minutes
                  Demold Time: 24 Hours
                  Hardness, Shore A: 90

                  Info: 75-90 is our hardest and strongest polyurethane rubber. It is used for making tough, durable molds, liners and stamps for casting, forming and texturing concrete. This firm rubber is also popular for making industrial parts, rollers, gaskets, bumbers, pads, and more.
                  If tinting this rubber is desired, we sell a selection of tinting colors here:
                  COLORED PIGMENTS

                  Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

                  75-90 Is Available in 2 Part Kits
                  Cat No.
                  Description
                  Price
                  POLY-75901
                  24oz Kit (16oz A + 8oz B)
                  $23.00
                  POLY-75902
                  48oz Kit (3 LBs)
                  $39.00
                  POLY-75903
                  3/4 Gallon Kit (6 LBs)
                  $63.50
                  POLY-75904
                  1 1/2 Gallon Kit (12 LBs)
                  $102.50
                  POLY-75905
                  3 Gallon Kit (24 LBs)
                  $175.00
                  POLY-75906
                  15 Gallon Kit (120 LBs)
                  $685.00

                  Kit sizes above show total volume included in kit
                  with total weight in parentheses.

                  Product Data Sheets
                  75-90 Product Bulletin

                  75-90 PART A -- MSDS
                  75-90 PART B-- MSDS


                  Polygel 35
                  Self Thickening RTV Liquid Urethane Rubber For Brush-On Molds
                  Polygel mold rubbers consist of two liquids, Part A and Part B which after mixing immediately gel to a brushable or trowellable consistency, then cure overnight at room temperature to a flexible, tough RTV rubber. They are ideal for molds built up with a brush, spatula or spray, Polygel mold rubbers are recommended for evaluation as a mold material for plaster, cement and waxes, as well as for limited casting with polyester epoxy and polyurethane resins.

                  Poly Gel 35
                  Mixed 1 Part A to 1 Part B
                  Hardness, Shore A: 35
                  Working Time: 8 to 10 Minutes
                  Demold Time: 24 Hours

                  Info: A self-thickening brushable mold rubber. Used primarily for blanket molds. Usually requires a mother mold backing to support the mold after it is made. Plaster or fiberglass and resin are commonly used for mother molds.

                  Available in 2 Part Kits
                  Cat No.
                  Description
                  Price
                  POLY-GEL351
                  16oz Kit (8oz A + 8oz B)
                  $15.25
                  POLY-GEL352
                  32oz Kit (2 LBs)
                  $25.50
                  POLY-GEL353
                  2 Quart Kit (4 LBs)
                  $42.50
                  POLY-GEL354
                  1 Gallon Kit (8 LBs)
                  $71.00
                  POLY-GEL355
                  2 Gallon Kit (16 LBs)
                  $120.00
                  POLY-GEL356
                  10 Gallon Kit (80 LBs)
                  $483.00


                  Product Data Sheets
                  PolyGel 35 Product Bulletin

                  PolyGel35 Part A -- MSDS
                  PolyGel35 Part B-- MSDS



                  TinSil 70 Series RTV Silicone Mold Rubbers
                  Consists of a liquid Part B base and Part A accelerator which after mixing at the proper ratio by weight, cure at room temperature to a flexible high tear strength RTV silicone rubber. All TinSil 70 Series mold rubbers are tin-catalyzed, condensation-cure systems. They are ideal for molds where easy release or high temperature resistance is needed. They are recommended for evaluation as mold materials for polyester, epoxy and polyurethane resins and waxes. Mold release is not required for casting parts in silicone molds. A mold release wax may be needed when pouring the liquid silicone rubber onto a porous substrate such as wood or plaster. Should not be used with silicone based releases or lubricants.
                  70-25 Tin-Sil
                  RTV Silicone Mold Rubber

                  Mixed 10 parts B to 1 part A
                  Hardness, Shore A: 25
                  Pour Time: 60 min.
                  Demold Time: 24 Hours
                  Cured Color: Light Blue

                  Info: A very soft and stretchable silicone rubber. No mold release is required, however when making a mold from a porous surface such as wood the surface should be sealed or painted to avoid possible sticking.

                  Available in 2 Part Kits
                  Cat No.
                  Description
                  Price
                  POLY-70251
                  16oz Kit (1LB)
                  $ 26.50
                  POLY-70252
                  32oz Kit (2LB)
                  $ 41.00
                  POLY-70253
                  Gallon Kit (9LB)
                  $ 123.00
                  POLY-70254
                  5 Gallon Kit (44LB)
                  $ 421.00


                  Product Data Sheets
                  70-25 Product Bulletin

                  Tinsil 70 Series -- MSDS

                  70-60 Tin-Sil
                  RTV Silicone Mold Rubber

                  Mixed 20 parts B to 1 part A
                  Hardness, Shore A: 60
                  Pour Time: 30 min.
                  Demold Time: 24 Hours
                  Cured Color: Red

                  This mold rubber is well suited for casting low-temperature melting metals such as pewter. This rubber has a lower tear strength compared to the 70-25 but can withstand higher temperatures upto 400 degrees.

                  Info: A more rigid silicone rubber similar to the hardness of a pencil eraser. No mold release is required, however when making a mold from a porous surface such as wood the surface should be sealed or painted to avoid possible sticking.

                  Available in 2 Part Kits
                  Cat No.
                  Description
                  Price
                  POLY-70601
                  1LB Kit
                  (approx. 1 Pint)
                  $ 28.00
                  POLY-70602
                  2LB Kit
                  (approx. 1 Quart)
                  $ 43.00
                  POLY-70603
                  8.4LB Kit
                  (approx. 1 Gallon)
                  $ 123.00
                  POLY-70604
                  42LB Kit
                  (approx. 4-1/2 gallons)
                  $ 449.00


                  Product Data Sheets
                  70-60 Product Bulletin

                  Tinsil 70 Series -- MSDS

                  Poly Latex 60
                  One Part Brush-On Rubber for Casting Plaster, Concrete, and Some Resins.

                  Built up in multiple layers with thin coats. Previous layers must be allowed to cure before recoating.
                  Poly Latex 60
                  Cat No.
                  Description
                  Price
                  POLY-L603
                  5 Gallon (40 LBs)
                  $205.00

                  Please Note: Poly Latex is capable of freezing at low temperatures (below 45F). We do not recommend shipping by UPS Ground during winter months.

                  Product Data Sheets
                  Latex 60 Product Bulletin

                  Latex 60 -- MSDS


                  Hydrogel-Alginate
                  Mixed 3 Parts Water to 1 Part Hydrogel By Weight.
                  • Easy to Use, Just Add Water
                  • Variable Working Time
                  • Non-Toxic, OK-for Body Casts
                  • Early Strength for Fast Demold

                  DESCRIPTION: Hydrogel® is a dry white powder which when mixed with water at a 3 parts water to 1 part Hydrogel® weight ratio (approximately 1 water to 1 1/4 Hydrogel® by volume) yields a creamy mix with a 5 minute working time. Demolding can be done, with care, several minutes after mix can no longer be worked.
                  Mold Release: Use petroleum jelly for skin contact or
                  Poly-2300 aerosol spray for industrial parts.

                  Available in Pound Increments
                  Cat No.
                  Description
                  Price
                  POLY-HYD01
                  1 LB Tub
                  (approx 1/3 gallon)
                  $ 14.50
                  POLY-HYD02
                  2 LB Tub
                  (approx. 3/4 gallon)
                  $ 25.00
                  POLY-HYD12
                  12.5 Pound Pail
                  (approx. 5 gallons)
                  $ 116.00


                  Product Data Sheets
                  Hydrogel Product Bulletin

                  Hydrogel -- MSDS

                  Easy-Flo 60
                  Low-viscosity polyurethane casting resin.
                  • 2.5 Minute pot life
                  • 30 Minute Demold Time.
                  • Cured Color: White/Off-White

                  This fast setting casting resin creates a hard yet strong plastic for many uses.

                  It can be tinted with any of our
                  colored pigments, however color will be offset by the natural white color of the product.

                  Extremely fluid for all types of casting.
                  Favorable strength and low-brittleness.

                  No Mold release is necessary for casting into silicone molds.
                  Pol-Ease 2300 should be used as a release from polyurethane molds.

                  Sold in 2 Part Kits : Mixed 1 to 1
                  Cat No.
                  Description
                  Price
                  POLY-EF601
                  16oz Kit
                  $ 12.95
                  POLY-EF602
                  32oz Kit
                  $ 22.25
                  POLY-EF603
                  2 Quart Kit
                  $ 35.50
                  POLY-EF604
                  1 Gallon Kit
                  $ 58.50
                  POLY-EF605
                  2 Gallon Kit
                  $ 103.00
                  POLY-EF606
                  10 Gallon Kit
                  $ 397.00

                  Kit sizes above show total volume included.

                  Product Data Sheets
                  Easy Flo 60 Product Bulletin

                  EasyFlo 60 -- MSDS

                  Plasteline Clay
                  Plasteline clay is a non-drying, non-hardening, no-sulfur modeling clay for a variety of applications. It is non-toxic, sanitary, and odorless. This clay is easy to handle and work with and remains hand-pliable at room temperature. Keeps its smooth, firm consistency and retains the shape into which it is molded. Has many uses for sculpting, shaping or moldmaking

                  Pale green in color
                  Each 2LB Block is approx: 5" x 2.5" x 2.5" in size.
                  Cat No.
                  Description
                  Price
                  KLY-02
                  2 LB Block
                  $8.00/Block
                  KLY-50
                  40 LB Pack (40lbs)
                  $143.00


                  MSDS
                  Klean Klay -- MSDS

                  Poly-Purge
                  Aerosol Dry Gas Blanket for extending the life of polyurethane rubbers.
                  Usage:
                  Poly Purge can be sprayed into an open container just before resealing the lid to displace moist air, thus extending the life of polyurethane liquids. Poly Purge is heavier that air and is nonflammable and non-ozone depleting. It is packaged in an aerosol-type can for directing the gas into the desired space.

                  Sold by the can or by the case of 12 cans
                  Cat No.
                  Description
                  Price
                  POLY-P10
                  10oz Can
                  $ 14.50
                  POLY-P10CSE
                  Case of 12 Cans
                  $ 150.00


                    <noframes id="bp55v">
                    <strike id="bp55v"><p id="bp55v"></p></strike>

                      <noframes id="bp55v"><form id="bp55v"></form>

                      <noframes id="bp55v"><form id="bp55v"><nobr id="bp55v"></nobr></form>

                      <form id="bp55v"><nobr id="bp55v"><progress id="bp55v"></progress></nobr></form>

                          <form id="bp55v"><th id="bp55v"><progress id="bp55v"></progress></th></form>

                                  game

                                  Buddhism

                                  education

                                  aviation

                                  explore

                                  search for

                                  entertainment

                                  Mobile phone

                                  video